P2723 DODGE code

What the P2723 code means. P2723 indicates a problem with the electrical circuit for the clutch pressure control solenoid 5 in the transmission. If a given engine setting doesn’t result in a proper pump pressure, the vehicle’s computer will log the P2723 code.

How do I fix error code P2723?

What Repairs Will Fix P2723?

  1. Changing the fluid and filter.
  2. Replace faulty pressure control solenoid.
  3. Repair or replace a faulty transmission pump.
  4. Repair defective transmission valve body.
  5. Install a remanufactured valve body.
  6. Transmission flush to clean passages.
  7. Cleaning corrosion from connectors.

What is a transmission pressure control solenoid?

Transmission Pressure Control Solenoid: DESCRIPTION

The transmission pressure control solenoid controls the fluid pressure to the internal friction plate clutches or drum bands. A bad or failing transmission pressure control solenoid can cause slipping, which can result in the transmission overheating.

What does code po796 mean?

P0796 code definition

The presence of the P0796 code in the PCM means that an abnormal reading from the electronic pressure control solenoid, or the related circuit, was detected.

What is code P2716 mean?

A P2716 code likely means that the Pressure Control Solenoid D is not regulating your transmission fluid correctly. Replacing an electronic solenoid is usually a straightforward repair unless there’s a more extensive issue with your vehicle’s circuitry.

  P2646 DODGE code

What is code P0756?

Code P0756 means that the vehicle’s PCM sensed an irregularity in shift solenoid B, which is located in the transmission. As a computer-controlled transmission, shift solenoids are used to manage how fluid is transferred from hydraulic circuit to hydraulic circuit.

What is code P0776 mean?

P0776 code definition

Code P0776 is an indication that your vehicle’s PCM has found an abnormality related to the electronic pressure control solenoid circuit or simply the solenoid itself.

Where is the transmission pressure control solenoid located?

Where is the transmission pressure control solenoid located? They are usually located within the valve body, the transmission control module, or the transmission control unit. In most cases, solenoids are installed inside of the oil pan, connected to the valve body of the transmission.

How do you fix a stuck pressure control solenoid?

What repairs can fix the P0747 code?

  1. Replace a faulty electronic pressure control solenoid.
  2. Clear blocked transmission fluid passages.
  3. Refill low or dirty transmission fluid.
  4. Repair or replace faulty electrical components within the circuit.
  5. Correct any internal transmission failures.

How much does it cost to replace a pressure control solenoid?

The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700.

How do I fix code P0842?

What repairs can fix the P0842 code?

  1. Replacing the pressure control solenoid.
  2. Refilling, or flushing and replacing, the old transmission fluid.
  3. Clearing blocked transmission fluid passages.
  4. Addressing any mechanic internal transmission failures.
  5. Replacing a faulty PCM or TCM, in rare cases.
  U0402 DODGE code

What does code po700 mean?

The P0700 code indicates that there’s a malfunction with your vehicle’s Transmission Control Module (TCM). This computer monitors your transmission and works with the Powertrain Control Module (PCM) and Engine Control Module (ECM) to shift gears when necessary.