If front pads are much thicker than rear, will it cause problems?


Are front brake pads thicker than rear?

Your front brakes actually have larger and thicker rotors than rear brakes to withstand this! While the brakes do act on all four wheels in newer vehicles, if your front brakes gave out, you would lose most of your braking power and not be able to slow down or stop.

Are rear brake pads thinner than front?

On top of that, because rear brake pads typically deal with less force than the front ones, they’re usually thinner. Combined with the electronic stability control and traction control, and you have accelerated rear brake pad wear.

Why are my front brakes bigger than my rear?

It’s due to physics – when decelerating the weight and energy transfers to the front of the vehicle, as a result front brakes are larger since they have more energy to cope with, and that extra weight also gives the front wheels extra grip and thus more braking ability.

What do I do if my brake pads are too thick?

If your brake pads seem too thick, all you got to do to get them fit in perfectly is to remove them from the caliper and give them a light sanding with fine-grit sandpaper, at least just enough to remove the extra shiny glaze from the surface of the brake pad.

Why are rear brake pads smaller?

Rear Brake Design Features:

These smaller calipers provide less clamping force on the rotors and thus create less heat and friction. Smaller Brake pads: To go along with the smaller calipers, rear brakes also use smaller brake pads to reduce friction on the rotor.

Which brakes work harder the front or the rear?

Front brakes

Front brakes handle most of the braking force and build up most of the friction heat. Rear brakes take on less braking force but provide stability to prevent spin-outs and rollovers.

Should you replace front and rear brake pads at the same time?

Most mechanics recommend replacing brake pads in the front or brake pads in the rear at the same time. If one brake pad on the front axle is replaced, then all brake pads on the front axle should be replaced.

Why do front brakes wear faster?

Your front brake pads will also wear down faster than your rear pads. The front of your vehicle handles a lot more weight transfer as you brake, causing more wear. Over time heat and friction also contribute to brake pad wear. Which axle your brakes are on will also influence how much wear and tear your pads sustain.

How many mm is safe on brake pads?

Your brake pads’ minimum thickness should be at least 6.4 millimeters. Above all else, you do not want the thickness to get any less than 3.2 millimeters or it will be very dangerous to drive. When it gets in the range of 3.2 to 6.4, you need to speak to a mechanic in Omaha, Nebraska to get them replaced.

Can you sand down brake pads to fit?

In the normal driving process, the pads have not been fully cured and bedded, so they won’t offer 100 percent of their potential braking efficiency right away. You should never sand or modify brake pads for several reasons.

Can I sand down brake pads?

For the brake pads, you will only need to remove them from the caliper, and give them a light sanding with fine grit sandpaper, just enough to remove the shiny glaze from the surface of the pad. After a while, pads can become crystallized and glaze over, this causes brake squeal and a notable decrease in braking power.