After replacing 4 tires on a Hyundai Elantra 2012


What should Hyundai Elantra tires be at?

This tyre placard recommends a minimum tyre pressure of 33psi for the Hyundai Elantra. This is equal to 230kPa and 2.3bar.

What size tires fit a 2012 Hyundai Elantra?

2012 Hyundai Elantra Limited Tire Size: P215/45R17.

How long do Elantra tires last?

How long do Hyundai Elantra tires last? If your driving habits are informed and around 12,000-15,000 miles per year, an average tire’s tread will wear out in about 3 years. This could be longer if you drive less than 12,000 miles or less if you drive more aggressively. Tire life also depends on the type of tire.

Where is the Hyundai Elantra spare tire?

trunk

2019-2020 Hyundai Elantra Spare Tire Kit This 2019-2020 Hyundai Elantra Spare Tire Kit is factory approved and space-saving. This Spare Tire Kit fits conveniently in your trunk.

Where is the TPMS reset button on Hyundai?

The TPMS reset button is usually located under the steering wheel.

How do you release air from tires?

Using the back end of the air gauge push the metal pin in the center of the valve stem down to release some of the air in the tire. You should do this in bursts and check the remaining pressure regularly.

What kind of tires does a 2012 Hyundai Elantra have?

2012 Hyundai Elantra Limited Tire Size: P215/45R17.

Can you put 16 inch tires on a Hyundai Elantra?

Yes, there are definitely 16″ wheels that will work, but not all 16″ wheels will fit.

What size rim does 2012 Hyundai Elantra have?

Hyundai Elantra 2012 2.0i

Tire Rim
205/55R16 89T 6.5Jx16 ET53 2.2
195/65R15 89T 6Jx15 ET46 2.2
215/45R17 87H 7Jx17 ET52 2.2


How do you change a tire on a 2012 Hyundai Elantra?

antennamediatorino.eu
Rather than on you remove. The nuts and slide the wheel off. Then place the spare onto the hub lining up the spare wheel with the bolts replace. The wheel nuts.

Does the Hyundai Elantra come with a spare tire?

Does the Hyundai Elantra Have a Spare Tire? No, it doesn’t. A recent trend in automobile manufacturing is to provide more fuel efficiency for a car by forgoing the extra kilograms that come from carrying a spare tire.

Where does the Jack go in a Hyundai Elantra?

Jack the rear of the car up by placing the floor jack under the rear axle near one of the outer wheels. The rear of the car is light and as one side is being lifted the opposite side will lift up as well. Place the jack stand directly in front of the rear tire under the reinforced area.

Where is the jack on a 2012 Hyundai Elantra?

antennamediatorino.eu
Right on that main subframe.

How do you find the jacking point of a car?

antennamediatorino.eu
You'll start to see and recognize what a jack point looks like here's a jack point on a Hyundai Sonata. And here's the back you can see the notches you'll put your jack. Between these notches.

Where do you put jack stands?

Jack stands must be placed directly under the lifting point. There should be enough room at every jack point to accommodate the stand’s grip. When releasing hydraulic pressure from the floor jack, a properly rated jack stand will hold the weight of the car as long as the stand is flat.

How do you jack up a car with 4 wheels?

antennamediatorino.eu
Place jack stands underneath each of the jacking points on the sides up front and lower the car down on to the jack stands. Remember. You may not want to jack the car to the full desired height.

Where do you put the jack when changing a car tire?

The right place for the jack is usually beneath the vehicle frame alongside the tire that’s flat. Many vehicle frames have molded plastic on the bottom with a cleared area of exposed metal specifically for the jack.